|
|
|
Pen Cure RN is a water based C-5 resin, membrane forming curing compound, when applied to freshly laid concrete leaves a film to ensure water retention. Pen Cure RN meets a Class Z curing compound and is compliant with AS 3799-1998 Appendix B. |
|
Pen Cure AC is a water based Acrylic membrane forming curing compound, when applied to freshly laid concrete leaves a film to ensure water retention. Pen Cure AC meets a class D, type 1 curing compound and is compiant with AS 3799-1998 Appendix B. |
|
CONPELL primer SE is a high performance polyvinyl butyral and epoxy based self etching coating designed to protect and promote adhesion to metals, zinc coated steel, stainless steel and aluminium prior to the application of CONPELL Acrylic, Epoxy and Polyurethane coatings. |
|
CONPELL MP Primer is a high performance alkyd resin based primer specifically formulated as a base coat to be applied to metal surfaces prior to applying Poly Shield SL36 or SL40. |
|
CONPELL Epo flake primer is a specifically formulated water based primer to be used prior to applying the Epo Shield WB60 base coat. |
|
CONPELL EnviroGrip primer |
|
CONPELL EnviroGrip primer is a specially formulated water based primer for application prior to the use of the EnviroGrip coating system |
|
Poly Shield SL36 is a high solids two component, UV stable solvent based polyurethane floor and wall coating designed for use on internal and external concrete and steel surfaces. Poly Shield SL36 is a extreamly hard wearing, durable surfaces that exibits excellent resistance to chemical attach. Poly Shield SL36 is ideal for use in factory and distribution warehousing, high traffic internal and external concrete surfaces. Poly Shield SL36 is ideal as a non sacraficial anti graffiti coating. |
|
EnviroGrip is a roller applied, textured water based, hard wearing Acrylic surface, designed to provide a semi flexible and durable textured finish to concrete surfaces. EnviroGrip exibits excellent adhesion to cementitious based products and is available in a variety of colour options. EnviroGrip must be top coated with Pen Shield AC25 or Poly Shield WB30 or SL40.
EnviroGrip is ideal for exterior concrete finishes such and commercial and domestic landscaping areas, Patios, Entertaining areas, podium slabs, walkways, stairs or anywhere a durable textured non slip coating is required. |
|
Pen Shield enhance is a siloxane/acrylic based penetrating sealer that will make the sealed surface more easily cleaned and resistant to penetration of oils and other liquids. Pen Shield enhance is ideal for use on concrete, concrete pavers, stone, fibrous board, concrete blocks, clay bricks and terracotta tiles. |
|
Epo Flake Flooring System |
|
The Epo flake flooring system is a combination of a roll coat epoxy floor coating with small multi coloured acrylic flakes broadcast across the surface to create an attractive hardwearing and durable flooring system. The Epo flake flooring system must be over coated with a minimum of two coats of either Epo Shield WB60, Poly Shield SL40, SL36 or WB30 depending on the finish required. (Contact manufacturer for correct top coat application) |
|
|
|
|
<< Start < Prev 1 2 3 4 Next > End >>
|
|
Page 1 of 4 |
Surface Products